Backflow incense is a cone with a hollow channel through its base that makes smoke sink and flow downward. It only works with backflow cones in a burner built for them. If your smoke rises, check the cone first, then the hole alignment, then drafts, then a blocked channel.
How does backflow incense work?
A backflow cone is hollow through the base. Placed over the opening in a backflow incense burner, the cone burns from the tip and its cooled smoke is drawn down through the channel and out over the burner, so it appears to pour like a waterfall. The cone and the burner are a matched pair.
Fix 1: Check that it is a backflow cone
Ordinary cones are solid, so their smoke rises. Burner makers say the same thing: standard cone incense will not create the flowing effect. Look for the hole in the base. You can find cones made for this in our backflow incense cones collection, including ranges from Balaji, Hem and Satya. A regular incense cone is not a substitute.
Fix 2: Line up the hole
The hole in the base of the cone has to line up with the opening in the burner's cup. Burner instructions state that the effect depends on this alignment. If the cone is sitting off-center, lift it and reseat it with tweezers.
Fix 3: Stop the draft
The flowing effect needs still air. Burner instructions advise placing the burner away from drafts and moving air, such as fans, air conditioners and busy doorways. If the smoke wanders or lifts, move the burner to a calmer corner.
Fix 4: Give it a few minutes
The smoke does not always start flowing immediately. Some guides say it takes a minute or two, and at least one maker says it can take up to ten minutes. Light the tip, let it flame briefly, blow it out so it smolders, and wait.
Fix 5: Clear the channel
Backflow cones leave an oily residue on the cup and in the channel. Makers describe this as normal. A blocked opening stops the smoke from falling, so let the burner cool, wipe the cup and channel with a dry or damp cloth, and let it dry fully before the next cone.
Fix 6: Check the surface and the burner
Put the burner on a level, heat-resistant surface. The residue can mark varnished wood, so use a mat. If you are choosing a new burner, look for a heat-resistant material, a stable base and a cup whose seat matches your cone's base size. See the full range of backflow incense burners, or browse other incense holders and burners.
Staying safe
Burn incense in a ventilated room, keep it away from anything flammable, and never leave it unattended. Keep it out of reach of children and pets.
Related reading
Frequently asked questions
What is backflow incense?
Backflow incense is a cone with a hollow channel in its base that makes the smoke flow downward through a matching burner, like a waterfall.
Can I use normal incense in a backflow burner?
No. Standard cones and sticks give ordinary rising smoke. You need backflow cones.
Why is my backflow smoke not flowing down?
The usual causes are a regular cone instead of a backflow cone, a misaligned hole, a draft, a blocked channel, or not waiting long enough for the flow to start.
How do I clean a backflow burner?
Let it cool, then wipe the cup and channel with a dry or damp cloth to remove the oily residue, and let it dry before using it again.
Sources
This guide is general information about fragrance, aromatherapy and home use. It is not medical advice.
Commentaires
Soyez le premier à commenter.