Long brass candle snuffer, 12 inch handle

Long Brass Candle Snuffer 12"

12" Brass Handle · 2.5" Snuffer Cone · Smoke-Free Extinguishing

$13.21

A 12-inch polished brass candle snuffer with a wide cone that smothers flames cleanly, reaching candles set deep in lanterns or holders.

  • Smoke-Free Extinguishing
  • Extended 12" Reach
  • Wide-Diameter Cone
  • Secure Textured Grip

In stock – Ready to Ship

  • Free shipping Free shipping On orders over $100
  • 14-days returns Easy and hassle free
  • Secure payment 100% protected

Ask a question

About: Long Brass Candle Snuffer 12"

Polished Brass Finish

Single-piece brass construction

12" Handle Length

Reaches lanterns & deep holders

2.5" Snuffer Cone

Fits a wide range of candle sizes

Quiet Extinguish

Snuffs the flame without scattering hot wax

Product Details

Blowing out a candle can send a puff of hot wax across a tablecloth or leave a curl of smoke drifting into a room, and a snuffer solves both problems at once. The Long Brass Candle Snuffer 12" is built for that job specifically: a long brass handle ending in a 2.5-inch cone that lowers over a flame and smothers it cleanly, cutting off its oxygen instead of scattering wax or ash.

The handle's extra length is the practical advantage over a short snuffer — at 12 inches, it reaches candles set inside lanterns, tucked behind decor, or standing tall in deep holders, without requiring a hand anywhere near the flame itself. The cone is sized to work with a wide range of candle diameters, from slim tapers to wider pillars, so one snuffer covers most of what is likely to be burning in a home at any given time.

The whole piece is finished in polished brass, and the handle is textured and slightly widened where it is gripped, which keeps it secure in hand even if fingers are a little unsteady reaching over a lit candle. It is a straightforward tool rather than a decorative statement piece, though the brass finish reads well next to most candle holders and doesn't look out of place left on a tray near a favorite candle.

Using it is simple: lower the cone straight down over the flame until it fully covers the wick, hold it in place for a second or two until the flame is out, then lift it away. Because the cone smothers rather than blows, it avoids the hot wax spatter and smoke plume that come with blowing a candle out directly, which matters most with scented or dyed wax that can spot fabric or furniture.

Care is minimal: wipe the brass with a soft, dry cloth after use to keep it free of soot and wax residue, and avoid water or cleaning solutions, which can tarnish the finish over time. Stored dry, the snuffer keeps its shine and its grip for repeated everyday use.

Find candles in every size this snuffer is built to handle in our Candles collection.

Why Choose the Long Brass Candle Snuffer 12"

Cleaner Than Blowing Out. A snuffer avoids the hot wax spatter and smoke that come from blowing a candle out directly, which matters most with scented or dyed wax near fabric or furniture.

Reaches What Short Tools Can't. The 12-inch handle covers lanterns, sconces, and deep holders that a standard short snuffer or a match can't comfortably reach.Candles collection

One Tool for Most Candles. The wide cone diameter means a single snuffer handles tapers, pillars, and most everyday candle sizes rather than needing several tools.

Long Brass Candle Snuffer 12" Benefits

Smoke-Free Extinguishing. Lowering the cone over a flame smothers it by cutting off oxygen, avoiding the smoke plume and wax spatter that come with blowing a candle out directly.

Extended 12" Reach. The long handle reaches candles tucked inside lanterns, set behind decor, or standing tall in deep holders, without a hand near the flame.

Wide-Diameter Cone. The 2.5-inch cone accommodates a wide range of candle diameters, from slim tapers to wider pillars.

Secure Textured Grip. A textured, widened section of the handle keeps the snuffer secure in hand even when reaching over a lit candle.

How to Use the Long Brass Candle Snuffer 12"

Step 1 — Position. Hold the snuffer by the textured handle and bring the cone directly above the lit wick.

Step 2 — Lower the Cone. Lower it straight down until the cone fully covers the flame.

Step 3 — Hold Briefly. Hold it in place for a second or two until the flame is fully out.

Step 4 — Lift Away. Lift the snuffer straight up and away from the candle.

Step 5 — Clean & Store. Wipe the brass with a soft, dry cloth after use to remove soot, and store it dry.

Main Ingredients

Materials. This snuffer is made of polished brass, from the 12-inch handle through the 2.5-inch snuffer cone. As hardware rather than a consumable product, it carries no ingredient list.

Shelf Life & Storage

No Expiration. As a brass tool, this snuffer does not have a shelf life.

Storage. Store it dry; moisture and cleaning solutions can tarnish the polished brass finish over time.

Longevity. Wiped clean of soot after each use and kept dry, the snuffer retains its shine and grip for years of regular use.

Safety Instructions

During Use. The cone will retain heat immediately after smothering a flame, so avoid touching it right away and lower it fully before releasing the handle.

Around Children & Pets. Keep out of reach of children and pets; the pointed cone and length of the handle make it unsuitable as a toy.

Storage Between Uses. Store the snuffer somewhere it can't be knocked or dropped onto a lit candle, and away from young children who might use it unsupervised.

Caution & Disclaimer

Caution. Never leave a lit tealight or candle unattended near this snuffer. Use it on a heat-resistant, stable surface away from drafts, flammable materials, children, and pets, and allow the brass cone to cool before handling after use.

Disclaimer. Results and use vary; this item is decorative/functional hardware and does not replace proper candle-safety practices.

Licensing & Trademarks. All names, imagery, and descriptions used for this product are for identification purposes only; any third-party trademarks referenced belong to their respective owners.

Shipping & Return

We process and ship all orders within 1–2 business days.

Most customers receive their orders within 4–7 business days, depending on location and carrier performance.

Once your order ships, you'll receive a tracking number via email or SMS to follow your delivery in real time.

Delivery times may vary slightly during peak seasons or weather conditions, but we always aim to get your order to you as quickly as possible.

We accept returns and exchanges within 14 days of delivery.

FAQs

Q: How long is the handle?
A: 12 inches, designed to reach candles in lanterns or behind decor.

Q: What size is the snuffer cone?
A: 2.5 inches in diameter.

Q: How do I clean it?
A: Wipe with a soft, dry cloth; avoid water or cleaning solutions that could tarnish the brass.

Q: What material is it made of?
A: Premium polished brass.

Q: Does it work with all candle sizes?
A: Yes, the 2.5-inch cone works with a wide range of candle diameters.

Customer reviews